It was the small bead that Rudra had thrown into the furnace without any expectations. It exploded, and in its place was a mysterious symbol, much like the one that appeared right before a spell was cast.
During the period when he was creating the Chiranjivi body tempering method, he had plenty of time to study these symbols along with the research. He tentatively named them Lipi, a term derived from Sanskrit and Pali that referred to writing or letters generally used to record scriptures or important documents. After a lot of experimentation and study, he had come up with a mature set of theories to understand these symbols that seemed to possess great power.
He thought of them like AI, where models took in data from multiple libraries and produced a single, packaged output that the user needed.
However, in the case of Lipi, instead of electricity, it was Aayu that provided the energy.
Instead of drawing from various libraries for data, the Lipi drew from the mantra.
Rather than the user entering a prompt, the practitioner’s intent became the prompt.
When everything was combined, it gave birth to the Lipi, and the Avatara essentially acted as the central control unit, not only controlling the flow of Aayu to determine the spell’s power but also directly controlling the spell itself.
If he considered this logic, then there were no conditions within the furnace for the Lipi to be born. Yet, to his surprise, here it was, right before his eyes.
’There goes my conjecture,’ he muttered, but another one of his assumptions was being challenged in plain, unfiltered sight.
How was this Lipi able to affect the surroundings without a wielder?
Rudra took a closer look. The language was completely different, yet he was somehow able to understand.
"Gale."
This Lipi symbolized an insatiable desire to rip anything apart with a strong gust of wind.
His brows furrowed in confusion as he sensed a familiar scent from it.
"Is it... His?" He wasn’t completely sure since all the beads looked the same, but the familiarity was not wrong. It was the exact same sensation he’d experienced from the flying Krasur he had met when he and Prabu tried to escape from the neighborhood at the beginning of the apocalypse.
The Lipi was brought under control, but he didn’t know what to do with it.
"Should I try incorporating it into the metal?" he wondered and put his thoughts into practice.
He squeezed his giant red hands tighter as if to force the Lipi to assimilate, but it did not work. It was as if it was not affected at all. Rudra was taken aback and then confused.
"Why is it not working?" he asked himself.
Repeating the question several times in his mind, a realization dawned on him.
’Wait, is the reason why it acts as if it is not affected at all because it’s actually not affected?’
’Meaning it’s not an entity made of Aayu but something else?’
His eyes lit up, and this time, instead of using his Aayu, he concentrated on the Lipi and used his mind alone.
He didn’t know if it would work since he never thought that his mental energy could be used for anything other than forming a mental space, but it turned out it could work on other mental energy constructs as well.
The Lipi vibrated slightly, putting up a little resistance, but Rudra was able to easily overpower it. He didn’t know if this was normal, but he didn’t pay much attention and turned his attention toward the metal.
Rudra’s eyes immediately sparkled.
The metal was pitch black in color, but as soon as the Lipi was integrated into it, various patterns appeared on its surface like the stripes on a tiger. And not only that, after the Lipi was completely assimilated into the metal, the air around the metal became turbulent.
’Does this metal now possess the properties of Gale?’ He was thrilled by the prospects and, without a second thought, threw another bead into the furnace.
Under the blazing temperatures, the bead quickly melted, and just as Rudra was preparing himself for another high-pressure release of Aayu, it never came. Other than a sudden influx of Aayu that caused the swirling gases within the furnace to become even more turbulent, there was no lippy being born.
"Maybe not all beads have a Lipi?" He couldn’t figure out the logic behind some beads having one and others not having it, but that was the best solution he could come up with.
He considered whether he should add more beads to try it out, but ultimately decided against it.
He noticed most of the Aayu from within the beads was being wasted. The Aayu literally went up in smoke, and it was putting a lot of strain on his mind while he tried to contain it.
Besides, he already got more than he wished from the sudden manifestation of a Lipi. Although he didn’t know what the halberd would look like after it was finished, he could tell that it would be a powerful partner by his side.
The furnace actually had an outlet that could pour out all its contents like water, but the reason why he didn’t use it previously was that some of its parts were made using normal heat-resistant materials instead of ceramic coating, and he doubted whether they could handle 900°C, much less the temperatures over 2,000°C right now.
It was also one of the reasons he used the method of burning the Krimir corpses directly within the furnace instead of under it. He didn’t know if the heat transfer medium could handle such temperatures.
Rudra tentatively estimated there would be about 14 L of metal, so he used sand to make seven hollow ingot molds holding 2 L of metal each and quickly cycled between all the molds until all seven were full.
As he suspected, the outlet immediately failed on the second mold and deformed straight away. Thanks to his foresight, he avoided making the mistake, and since he was prepared, he reacted immediately and didn’t let the molten metal spill on the floor.
The ingots gave off a bright yellow light, their soft glow reflecting on Rudra’s rough face.
Rudra waited till the molds cooled down and began to solidify. Once they had taken shape, he broke one of the molds and returned it to the furnace. He set the furnace ablaze once again and started heating the metal. This time, he did not plan to melt it, so the temperature was kept at a manageable level.
Once the ingot reached a bright orange color, he gripped it with the modified tongs and started hammering it into a billet.
The hammer strikes were like miniature explosions, with each impact sending shock waves throughout the laboratory. The sparks flew everywhere, and even in the darkness, it looked like a firecracker exploding with every hit. The sound reverberated not only through the Laboratory of Metallurgy but also through the neighboring mechanical engineering and electrical and electronics laboratories.
The people passing by and doing their jobs constantly looked at the metallurgy laboratory with shock and awe. They didn’t know what was happening, but the impact could be felt in their bones and sent a shiver through their spines.
"Is that a hydraulic hammer?" a senior mechanical student hesitantly asked.
His question was immediately shot down by his companion, who was carrying rocks with him to help fortify the main gate. "Do we have a hydraulic hammer in our building that can work without power?"
The student immediately shut his mouth. That’s right, there was no electricity. Yet the sound of the hammer strikes did not seem any less impactful.
Rudra had no idea of the commotion he had caused, but his entire focus was on the ingot before him.
At that moment, his mind was empty. He had no worries about the apocalypse, the Krimirs, or the Krasurs. He wasn’t even aware of his surroundings. He was at absolute peace, and his sole focus was on the metal before him, and all he cared about was hammering out the impurities.
He started hammering with the mentality of giving it a try since he didn’t know if the metal even had impurities, but to his surprise, it did. Black flakes slipped off the surface of the ingot as he started making it into a billet, and the stripes formed from the Lipi actually became deeper as the intensity of the wind became stronger with every hit.
Once he was done, he immediately picked up the other ingots, reheated them, and repeated the process all over again.
With his mind at ease and his heart beating to the rhythm of hammering, the ingots were processed faster and faster.
Before long, the heat radiating from his own body acted in synergy with the heat from the ingot. Maybe it was the heat that was getting to his mind, he started to imagine that he was Vishwakarma, the god of blacksmithing who forged the god-king Indra’s thunderbolt and the God of destruction Shiva’s Trishul. And as if responding to his intention,
"O Vishwakarma, guide our flame, forge the iron, forge its name. Strike by strike, let steel be born, Strong as thunder, sharp as dawn."
A rhythmic Sanskrit song began to ring out in his mind, and the Aayu in his Kanda flowed out like a stream meeting a river.
The Aayu spread evenly throughout his body, and with a Lipi manifesting in his mental space, his body gave off a red glow.
Rudra was unaware of any of this happening. The only thing that even registered in his mind was that he was feeling good while hammering and started singing the song taught by his grandfather during forging.
He was completely lost in the moment, and the only thing he felt was his strength drastically rising and each of his hits becoming more impactful.
The hammerings were no longer like small explosions. It was almost as if meteors were impacting the Earth with every hit.
Under such a special state, all seven ingots were hammered flat in under half an hour, and he started forge welding.
He stacked four billets on top of one another and started hammering them into an elongated shape. Once it reached a sufficient length, he folded it into itself and repeated the process twelve times.
With every cycle, the metal became more uniform, and the stripes became deeper. The concentration of Aayu on its surface became higher, and the strength required to fold it each time became astronomical.
On the final try, Rudra lengthened the metal into a long bar, turning between blows to maintain an even cross-section, and reserved sufficient material at the upper end for the halberd’s head.
He made the end of the pole into a pointed spike while he started working on the three other billets and began shaping them into the head of the halberd.
He wanted the halberd to look like the one he had envisioned for his Avatara, so he drew out a broad, crescent-shaped blade like a half-moon and forged a long central spike, with the opposing projection becoming a sharp hook.
Rudra left a crater between the crescent blade and the hook, right on the central spine. He placed the red gem he got from the Krimir shaman’s mace. He wanted to see if it would have any effect on the weapon upon its installation, but even if it didn’t, it didn’t matter since he was just trying his luck.
Both the individual parts of the head and the shaft were done. Rudra connected them both, and he forged the joint together with devastating hammer strikes, his fire elemental Aayu exploding outward.
Rudra didn’t know how long it had been since he started the process of forging, but when he finally lowered his hammer, he was shocked to realize that his Aayu had almost bottomed out and a puddle of sweat had formed under his feet.
He was even more shocked when he looked at his hammer. It was deformed, out of shape, and the blue metal coating he had given it was almost completely cracked.
He suddenly felt light-headed, and he was about to fall down, but he stopped himself at the last moment. He wasn’t done yet.
"I need a catalyst."
He looked around with irritation, and finally, his gaze landed upon the blood of the Krimirs. His eyes lit up, and without hesitation, he gripped the halberd with his tongs, threw it into the furnace, and poured all the blood into the furnace.
Flames immediately erupted even without him deliberately lighting them, and the violent Aayu spewed out of the furnace, but this time, he didn’t try to hold it in.
He wasn’t worried that the halberd would melt either. The heat from the flames had already stopped having an effect on the metal. The entire time he was forge welding, he used his own fire elemental Aayu to supplement the heat to keep the temperature at a high level.
He let all the Aayu escape along with the last trace of impurities, and he surprisingly began to feel a mental connection with the weapon.
He collapsed on the laboratory floor and glued his eyes to the furnace in anticipation. Once the heat cooled down, he got up, pulled up the halberd with his own hands, felt the scorching sensation yet did not care, and looked at its surface with his eyes wide open.
P.S. I’ll add the complete song to the assets. Look at my bio for the link.